|
|
|
Philips Aura PROMO CT Scanner |
Click here for more pictures
Specifications:
 |
3.5 MHU MRC CT 162 Tube installed 9/2005.
Approximate Tube Count: 41,080 |
|
Gantry and Table:
 |
Gantry Manufactured:
September 2000. Approximate Count: 626,519 |
|
Table Manufactured:
October 2000 |
|
High frequency X-Ray
system with a generator output capacity of 30KW |
|
ClearView Solid State
Detector. |
|
Rapid View
Reconstructor. |
|
Raw Data Disk |
|
|
Installed Options:
|
3D |
|
MPR |
|
Dental |
|
Angiography |
|
DICOM |
|
|
Operator’s Console and
Workstation:
|
Console Software: CT
Aura Release 1.5.1 Level 3. February 2004 |
|
Workstation: Philips
Easyvision 1.3 level 3 |
|
Scan Control
Environment:
 |
Patient Scheduling
Software |
|
Scan Acquisition
Mode:
|
Scanogram |
|
Serial Scan |
|
3D (Volumetric
Scan) |
|
Multi Scan |
|
|
Image Handling
Environment:
|
StackView |
|
DirectMovie |
|
Image
Processing Software |
|
Image
Presentation Software |
|
Image Analysis
Software |
|
Image Windowing
Software |
|
Full Volume
Multi Planar Reformatting (MPR) |
|
EasyPrint Hard
Copy Imaging |
|
Print Compose
Software |
|
Protocol Print |
|
DICOM Archive
to Software |
|
Network
Interface (Ethernet) |
|
Operator’s
Console Hardware Composition |
|
Image Data Dist |
|
EasyStore
CD-Recordable |
|
21’’ Flat
Screen Monitor |
|
21’’ CRT
Monitor |
|
|
|
|
Features Description:
|
Gantry and Table:
|
Scan Rotation
Times: 1, 2, 3, and 4 seconds |
|
Scan Times: 1, 1.4,
2, 3, and 4 seconds |
|
Slice Thickness
(All pre-collimated): 1, 2, 3, 5, 7, and 10 mm |
|
Minimum-Maximum
Field Of View: 4 – 48 cm |
|
Gantry Aperture: 67
cm |
|
Gantry Angulations:
+30/-28 degrees |
|
|
Clear View Solid State
Detector System:
|
ClearView Detector:
696 channels |
|
Photon Capture
Efficiency: 99.99% |
|
Dynamic Range:
1:1,000,000 |
|
High Contrast
Spatial Resolution: 15 LP/cm at Cut-off |
|
Low Contrast
Resolution: 3mm at 0.3% at 35mGy (10mm 120 KV) |
|
|
MRC CT X-Ray Tube:
|
Anode Heat Storage
Capacity: 3.5 MHU |
|
Anode Heat
Dissipation, maximum: 735 KHU/min |
|
|
High Frequency X-Ray
System:
|
Generator Output
Capacity: 30 KW |
|
KV Selections: 100,
120, 130, and 140 kV |
|
mA Selections: 15
to 50 mA in steps of 5 ma; 50 to 100 mA is steps of
10 mA, 120 to 180 mA in 20 mA Steps |
|
|
RapidView Reconsturtor:
|
Evaluation in
Parallel with acquisition |
|
Direct control
during interventional procedures |
|
Tracking of
contrast flow in real time |
|
Greater focus on
productivity by eliminating the ‘Dead Time’ due to
image reconstruction |
|
Prospective and
retrospective reconstruction of overlapping slices |
|
|
Reconstruction Time:
|
1.0 sec / image at
512x512 matrix |
|
|
Raw Data Disk
|
Storage Capacity:
4.0 Gbytes |
|
Raw data storage
capacity: 1024 raw data files |
|
|
PATIENT TABLE
|
Table Top width:
410mm |
|
Elevation
travel:470 to 965mm |
|
Elevation speeds:
30mm/sec and 15/sec |
|
Longitudinal
travel: 1930mm |
|
Longitudinal travel
speeds: 100mm/sec, 5mm/sec |
|
Metal Free scanning
range: 1575mm |
|
Incremental
accuracy: 0.25mm |
|
Maximum supportable
weight:225 kg (150 kg at 0.25mm accuracy) |
|
|
The standard accessory
set includes:
|
Axial head support
(adult and pediatric) |
|
Angled wedges for
positioning kyphotic patients |
|
Coronal head
support with cushion for chin and forehead |
|
Head support holder |
|
Forehead and chin
straps (25mm) |
|
Forehead and chin
straps (40mm) |
|
Lower back support |
|
Body straps (50mm) |
|
Arm support set |
|
Velcro straps |
|
Mattress |
|
|
3D Scan Mode comprises:
|
Dedicated
volumetric reconstruction algorithm for optimized
image quality |
|
Maximum scan times
of 100 seconds |
|
100, 120, 130, and
140 kV selections |
|
15 mA to 180 mA
selections |
|
1, 2, 3, 5, 7, and
10 mm slice selections |
|
Pitch selections
from 0.75 to 3 in steps of 0.25 |
|
Minimum
Reconstruction index of 0.1 mm |
|
Direct storage of
Raw Date to Disk |
|
|
|
|
Contact
us for more information and to request a quote, or to
schedule an inspection.
|
|
